Everything is included in a fabric duct dispersion system

Everything is included in a FabricAir dispersion system

Many functions known from conventional metal ducts are fully integrated in a FabricAir dispersion system, making diffusers, grilles, dampers, etc., redundant. FabricAir dispersion systems are all inclusive.

You can forget about the following when using fabric air dispersion systems:

  • No extra grilles or diffusers are necessary. The FabricAir dispersion systems function as both a duct system and as an air dispersion system.
  • No extra noise reduction is needed (except perhaps reduction of fan noise). Noiseless is the standard.
  • No inconvenient alterations or assembly on site. A FabricAir dispersion system fits straight from the factory, is assembled with zip fasteners and is ready for installation as soon as it arrives.
  • No damper is necessary. A FabricAir dispersion system does not require balancing.
  • Painting is not necessary as the fabrics are dyed.
  • No extra insulation is necessary. FabricAir dispersion systems are condensation free.
30-70% less expensive than metal

FabricAir dispersion systems offer multiple opportunities to save money without sacrificing quality or flexibility in design. Utilizing FabricAir dispersion systems can result in 30-70% savings over the cost of conventional ducting through a simple installation process, economical shipping solutions, space-savings and efficient materials.

30-70% less expensive than metal

FabricAir dispersion systems offer multiple opportunities to save money without sacrificing quality or flexibility in design. Utilizing FabricAir dispersion systems can result in 30-70% savings over the cost of conventional ducting through a simple installation process, economical shipping solutions, space-savings and efficient materials.

Noiseless

There are many considerations when evaluating noise levels in any given space. Air distribution is just one of those factors. With FabricAir ducts you can concentrate on the other factors because fabric is not rigid, like metal ducts, and therefore does not transmit noise. FabricAir systems typically operate in the 25-30 NC level range, but can be designed to go as low as NC 15.

Noiseless

There are many considerations when evaluating noise levels in any given space. Air distribution is just one of those factors. With FabricAir ducts you can concentrate on the other factors because fabric is not rigid, like metal ducts, and therefore does not transmit noise. FabricAir systems typically operate in the 25-30 NC level range, but can be designed to go as low as NC 15.

Engineered system design

FabricAir dispersion systems are fully customizable and can be tailored to your specific needs. We have a dedicated engineering department to help design the optimal duct system using our proprietary 3D software.

Engineered system design

FabricAir dispersion systems are fully customizable and can be tailored to your specific needs. We have a dedicated engineering department to help design the optimal duct system using our proprietary 3D software.

Balancing is not necessary

FabricAir dispersion systems do not require field balancing. Due to the intelligent system design and the nature of our materials, we do not apply diffusers, grills or dampers and thus do not have to balance the system once installed.  We do all the "balancing" at our factory so you don't have to. With conventional metal ducting, a series of tests are necessary to ensure that the system runs as required. The goal of this airside test and balance is to verify that your terminal device (diffuser) has the specified amount of air flowing to it. This can mean balancing many diffusers and each time one is adjusted the rest of the diffusers in the system are affected, including those that have already been balanced. As a result of this, balancing a metal system is an iterative, time consuming, and inaccurate process where "within 10% of specifications" is considered a success. With a FabricAir dispersion system there is only one place to verify the airflow, namelyat the inlet to the FabricAir system. This way we can be sure that the system is performing as designed.

Balancing is not necessary

FabricAir dispersion systems do not require field balancing. Due to the intelligent system design and the nature of our materials, we do not apply diffusers, grills or dampers and thus do not have to balance the system once installed.  We do all the "balancing" at our factory so you don't have to. With conventional metal ducting, a series of tests are necessary to ensure that the system runs as required. The goal of this airside test and balance is to verify that your terminal device (diffuser) has the specified amount of air flowing to it. This can mean balancing many diffusers and each time one is adjusted the rest of the diffusers in the system are affected, including those that have already been balanced. As a result of this, balancing a metal system is an iterative, time consuming, and inaccurate process where "within 10% of specifications" is considered a success. With a FabricAir dispersion system there is only one place to verify the airflow, namelyat the inlet to the FabricAir system. This way we can be sure that the system is performing as designed.

Colors and special dying

FabricAir ducts are available in a variety of standard colors and custom colors upon request. If the color you want is not available, call us about a custom color. We can produce a duct in any color using our Trevira line of fabrics.

Colors and special dying

FabricAir ducts are available in a variety of standard colors and custom colors upon request. If the color you want is not available, call us about a custom color. We can produce a duct in any color using our Trevira line of fabrics.

Condensation-free

Traditional HVAC designs require knowing the dew point of the space being conditioned to avoid condensation on the surfaces of the metal ducts and grills. This phenomenon is referred to as "sweating" in the industry. The traditional fix for sweating ducts is to insulate the entire duct or to use double wall ducting; both of which add significantly to the projectcost. With FabricAir ducts the fix is simple: using permeable fabric. Permeable fabric allows the duct to "breathe", which creates an air blanket around the duct and keeps the duct dry, without trippling the cost!

Condensation-free

Traditional HVAC designs require knowing the dew point of the space being conditioned to avoid condensation on the surfaces of the metal ducts and grills. This phenomenon is referred to as "sweating" in the industry. The traditional fix for sweating ducts is to insulate the entire duct or to use double wall ducting; both of which add significantly to the projectcost. With FabricAir ducts the fix is simple: using permeable fabric. Permeable fabric allows the duct to "breathe", which creates an air blanket around the duct and keeps the duct dry, without trippling the cost!