Industrial - Henry Ling, Dorchester, United Kingdom

Additional cases in the category
Case study

Henry Ling, Dorchester, United Kingdom

A printing area required close temperature and humidity conditions, but was experiencing poor air distribution from perimeter AHU’s. Due to limited head room height a 1,150 mm D duct approx. 20 m long was positioned along the center of the room. It used a combination of laser cut micro holes to distribute air under the duct and nozzles to distribute air outwards towards the side walls. This created a very even air distribution and close control of the conditions in the room.

Most popular in this category:

Combi 70

The fabric is permeable and comes with a 10 year warranty.

MicroFlow™

Air is distributed through Micro-perforations.

NozzFlow™

Air is distributed through venturi shaped plastic nozzles with excellent discharge coefficients.

Questions? Please contact
FabricAir A/S
Islandsvej 3
4681 Herfølge
Denmark
(+45) 56 65 21 10
(+45) 56 65 99 07